HEIDENHAIN iTNC 530 (340 49x-03) - Manual (Page 331)

HEIDENHAIN iTNC 530 331
8.3 Cy
cles f
o
r Dr
illing,
T
a
pping and Thr
ead Milling
8.3 Cycles for Drilling, Tapping and
Thread Milling
Overview
The TNC offers 16 cycles for all types of drilling operations:
Cycle Soft key Page
240 CENTERING
With automatic pre-positioning, 2nd set-
up clearance, optional entry of the
centering diameter or centering depth Page 333
200 DRILLING
With automatic pre-positioning, 2nd set-
up clearance Page 335
201 REAMING
With automatic pre-positioning, 2nd set-
up clearance Page 337
202 BORING
With automatic pre-positioning, 2nd set-
up clearance Page 339
203 UNIVERSAL DRILLING
With automatic pre-positioning, 2nd set-
up clearance, chip breaking, and
decrementing Page 341
204 BACK BORING
With automatic pre-positioning, 2nd set-
up clearance Page 343
205 UNIVERSAL PECKING
With automatic pre-positioning, 2nd set-
up clearance, chip breaking, and
advanced stop distance Page 346
208 BORE MILLING
With automatic pre-positioning, 2nd set-
up clearance Page 349
206 TAPPING NEW
With a floating tap holder, with automatic
pre-positioning, 2nd set-up clearance Page 351
207 RIGID TAPPING NEW
Without a floating tap holder, with
automatic pre-positioning, 2nd set-up
clearance Page 353
209 TAPPING W/ CHIP BRKG
Without a floating tap holder, with
automatic pre-positioning, 2nd set-up
clearance, chip breaking Page 355