HEIDENHAIN iTNC 530 (340 49x-03) - Manual (Page 157)

HEIDENHAIN iTNC 530 157
4.12 List of All Cur
rent Er
ro
r Messag
e
s
4.12 List of All Current Error
Messages
Function
With this function you can show a popup window in which the TNC
shows all current error messages. The TNC shows errors both from
the NC as well as those from the machine tool builder.
Show error list
You can call the list as soon as at least one error message is present:
8 To display the list, press the ERR key.
8 You can select one of the current error messages with
the arrow keys.
8 With the CE key or the DEL key you can delete the
error message from the popup window momentarily
selected. When you delete the last error message,
the popup window closes as well.
8 To close the popup window, press the ERR key again.
Current error messages are retained.
Calling the TNCguide help system
You can call the TNC’s help system via soft key. Immediately the help
system shows you the same error explanation that you receive by
pressing the HELP soft key.
8 Call the help for HEIDENHAIN error messages.
8 Call the help for HEIDENHAIN error messages, if
available.
Parallel to the error list you can also view the respective
help text in a separate window: Press the HELP key.
If your machine manufacturer also provides a help
system, the TNC shows an additional MACHINE
MANUFACTURER soft key with which you can call this
separate help system. There you will find further, more
detailed information on the error message concerned.