HEIDENHAIN iTNC 530 (340 49x-03) - Manual (Page 617)

HEIDENHAIN iTNC 530 617
1
1
.1
1 Pr
eassigned Q
P
ar
amet
ers
Workpiece status Parameter value
Good Q180
Re-work Q181
Scrap Q182
Measured deviation with Cycle 440 Parameter value
X axis Q185
Y axis Q186
Z axis Q187
Tool measurement with the BLUM laser. Parameter value
Reserved. Q190
Reserved. Q191
Reserved. Q192
Reserved. Q193
Reserved for internal use Parameter value
Markers for cycles (point patterns) Q197
Number of the last active measuring cycle Q198
Status during tool measurement with TT Parameter value
Tool within tolerance Q199 =0.0
Tool is worn (LTOL/RTOL exceeded) Q199 =1.0
Tool is broken (LBREAK/RBREAK exceeded) Q199 =2.0