HEIDENHAIN iTNC 530 (340 49x-03) - Manual (Page 261)

HEIDENHAIN iTNC 530 261
6.6 P
a
th Cont
ours—FK F
ree Cont
our Pr
ogr
a
mming
Converting FK programs into HEIDENHAIN
conversational format
The TNC features two possibilities for converting FK programs to
plain-language programs:
„ Convert the program so that the program structure is maintained
(program-section repeats and subprogram calls). Cannot be applied
if you have used Q-parameter functions in the FK sequence.
„ Convert the program so that program-section repeats, subprogram
calls and Q-parameter calculations are linearized. For linearization,
instead of the program-section repeats and subprogram calls, the
TNC writes the NC blocks processed internally into the generated
program or calculates values assigned via Q-parameter calculations
within an FK sequence.
8 Select the program you want to convert.
8 Shift the soft-key rows until the CONVERT
PROGRAM soft key appears.
8 Select the soft-key row with functions for converting
programs.
8 Convert the FK blocks of the selected program. The
TNC converts all FK blocks into straight-line blocks (L)
and circular-arc blocks (CC, C), and the program
structure is maintained, or
8 Convert the FK blocks of the selected program. The
TNC converts all FK blocks into straight-line blocks (L)
and circular-arc blocks (CC, C), and the TNC linearizes
the program.
The name of the file created by the TNC consists of the
old file name and the extension _nc. Example:
„ File name of the FK program: HEBEL.H
„
File name of the conversational dialog program
converted by the TNC:HEBEL_nc.h
The resolution of the created conversational program is
0.1 µm.
The converted program includes the comment after the
converted NC blocks SNR and a number. The number
indicates the block number of the FK program from which
the respective conversational block was calculated.