HEIDENHAIN iTNC 530 (340 420) ISO programming - Manual (Page 7)

HEIDENHAIN iTNC 530 7
Changed features of the NC software 340 420-xx
n Cycle G62 Tolerance has been expanded so that different filter
settings can be selected for High Speed Cutting (see “TOLERANCE
(Cycle G62)” on page 369).
n In Cycle G210 (Slot with reciprocating plunge), the approach
behavior for finishing has been changed (see “SLOT with
reciprocating plunge-cut (Cycle G210)” on page 285).
n
The number of contour elements permitted in SL Cycles, Group II,
has been increased from approx. 256 to approx. 1024 (see “SL
Cycles Group II” on page 306).
n ISO programs are now programmed in conversational mode (see
“Creating and Writing Programs” on page 91).
n The transfer of the current tool position coordinates into the
program has been improved (see “Actual position capture” on page
95).
n The transfer of the value that is calculated by using the on-screen
pocket calculator into the program has been modified (see
“Integrated Pocket Calculator” on page 110).
n
The PGM CALL key can now be used for programming program
calls (see “Calling any program as a subprogram” on page 375).
n Detail magnification is now also possible in plan view (see
“Magnifying details” on page 420).
n When program sections are copied, the copied block remains
highlighted after having been inserted (see “Marking, copying,
deleting and inserting program sections” on page 98).