HEIDENHAIN iTNC 530 (340 420) ISO programming - Manual (Page 486)

486 13 Tables and Overviews
13.3 T
e
c
hnical Inf
o
rm
ation
Block processing time
3-D straight line without radius
compensation
n
3.6 ms
o 0.5 ms (software option 2)
Axis feedback control n Position loop resolution: Signal period of the position encoder/1024
n Cycle time of position controller: 1.8 ms
n Cycle time of speed controller: 600 µs
n Cycle time of current controller: minimum 100 µs
Traverse range n Maximum 100 m (3973 inches)
Spindle speed
n
Maximum 40 000 rpm (with 2 pole pairs)
Error compensation n Linear and nonlinear axis error, backlash, reversal spikes during circular movements,
thermal expansion
n Stick-slip friction
Data interfaces
n
One each RS-232-C /V.24 and RS-422 / V.11 max. 115 kilobaud
n Expanded data interface with LSV-2 protocol for remote operation of the TNC through
the data interface with the HEIDENHAIN software TNCremo
n Ethernet interface 100 Base T
approx. 2 to 5 megabaud (depending on file type and network load)
Ambient temperature
n
Operation: 0 °C to +45 °C (32 °F to 113 °F)
n
Storage: –30 °C to +70 °C (–22 °F to 158 °F)
Accessories
Electronic handwheels n One HR 410: portable handwheel or
n One HR 130: panel-mounted handwheel or
n Up to three HR 150: panel-mounted handwheels via HRA 110 handwheel adapter
Touch probes n TS 220: 3-D touch trigger probe with cable connection, or
n TS 632: 3-D touch trigger probe with infrared transmission
n TT 130: 3-D touch trigger probe for workpiece measurement
Specifications