HEIDENHAIN iTNC 530 (340 420) ISO programming - Manual (Page 5)

HEIDENHAIN iTNC 530 5
TNC Model, Software and Features
This manual describes functions and features provided by TNCs as of
the following NC software numbers.
The export versions of the TNC have the following limitations:
n
Linear movement is possible in no more than 4 axes simultaneously.
The machine tool builder adapts the useable features of the TNC to his
machine by setting machine parameters. Some of the functions
described in this manual may not be among the features provided by
your machine tool.
TNC functions that may not be available on your machine include:
n
Probing function for the 3-D touch probe
n Tool measurement with the TT 130
n Rigid tapping
n Returning to the contour after an interruption
Please contact your machine tool builder to become familiar with the
features of your machine.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the TNCs. We recommend these courses as
an effective way of improving your programming skill and sharing
information and ideas with other TNC users.
Location of use
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55 022, and is intended for use primarily
in industrially-zoned areas.
TNC model NC software number
iTNC 530 340 420-09
iTNC 530 340 421-09
Touch Probe Cycles User’s Manual:
All of the touch probe functions are described in a separate
manual. Please contact HEIDENHAIN if you require a copy
of this User’s Manual. ID number: 369 280-xx.