Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 87)

December 16, 2004 NewsBrowse Installation and Configuration Guide 87
Advanced encoder + Server stage
For this configuration stage you configure the NewsBrowse server to work together
with the Advanced encoder and NAS from the Advanced encoder stand-alone stage.
MDI services are also required, as configured in the MDI stage.
The portion of the NewsBrowse system configured and tested in this stage is
illustrated by the following diagram.
Refer to “Two tier system diagram” on page 10 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of the encoder plus server, do the following:
1. “Configure Media Frame Core ASK: Advanced encoder” on page 87
2. “Configure Rules Automation: Advanced encoder” on page 88
3. “Test: Advanced encoder + Server stage - high-res source” on page 91
4. “Test: Advanced encoder + Server stage - MPEG proxy source” on page 92
5. “Checklist: Advanced encoder + Server stage” on page 92
Configure Media Frame Core ASK: Advanced encoder
Make sure the Advanced encoder’s Proxy Transfer service is registered with the ASK
software component as a “Transfer” device, as explained in
“Configure Media Frame
Core ASK: Register components” on page 51 .
Advanced encoder + Server stage
info
NewsBrowse Server
clk
clk
mpg
1-Channel
Encoder
Production Network
MDI Server
mpg
th/sb
TC
Network Attached
Storage
Advanced
Encoder
th/sb mpg
Video
Server
AV TC
info
UIM