Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 19)

December 16, 2004 NewsBrowse Installation and Configuration Guide 19
Single-channel encoder instructions
Single-channel encoder instructions
The single-channel encoder creates MPEG-1 proxy versions of high-resolution video.
The single-channel encoder records MPEG-1 proxy in parallel with ingest into a video
server. A NewsBrowse system may contain multiple single-channel encoders.
If a NewsBrowse system uses Advanced encoders for the creation of MPEG, the
single-channel encoder can be an optional component.
Platform Specifications:
Cable as illustrated and as follows:
• Connect a cable from the Video In port on the Encoder to the analog video feed
source.
• Connect a cable from the Audio In port on the Encoder to the analog audio feed
source.
• Connect a Timecode cable from the Timecode In port (RCA port) to the house
timecode feed.
• Connect two Ethernet cables from the LAN1 and LAN2 ports on the Encoder to a
network router or switch. Make sure the LAN2 port is connected to the network
where the Profile exists. A single-channel encoder can be configured to control up
to two Profiles simultaneously using Ethernet API.
• Optionally connect a RS-422 control cable from the COM2 port on the encoder to
the RS-422 port on the Profile Media Server (only if API is not used). See below
for cable pinouts.
• Optionally connect a RS-422 control cable from the COM2 port on the encoder to
a backup VTR. See below for cable pinouts.
• P 3, 1Ghz or better (1 or 2 CPU) • Windows 2000 Server (SP3)
• 512 MB RAM- • .NET Framework 1.1
• CD-ROM Drive • Internet Explorer 6 (SP1)
• Minimum 20GB Program Drive • 100Tx LAN (x2)
Power
LAN port 1
VGA cable
to KVM
Keyboard/mouse
port to pigtail
to KVM
RS-422 Out
for VDCP Control
from Profile Channel
RCA Timecode In
Audio In
from Router
Video In
from Router LAN port 2
(optional)