Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 27)

December 16, 2004 NewsBrowse Installation and Configuration Guide 27
Chapter
3
Configuring the NewsBrowse System
You can use the topics in this chapter in the following ways:
• Initial configuration — After your NewsBrowse system components are rack
mounted, cabled, and the physical installation process is complete, continue with
the configuration instructions in this chapter to create a working system. You can
follow the
Basic path or the Advanced path through the core configuration stages,
as explained “Configuration overview” on page 28 .
• Customizing — After the system is functioning, you can go back to the
configuration pages and modify the settings documented in this manual as
Advanced
!
to customize the system to fit any special workflow requirements.
The topics in this chapter include the following:
• “Configuration overview” on page 28
• “Establish conventions” on page 29
• “Configure network: Two tier” on page 34
• “Prepare for core configuration stages” on page 38
• “Stop NewsBrowse services” on page 49
• “ASK registration stage” on page 50
• “Encoder stand-alone stage” on page 61
• “Managed Device Interface (MDI) stage” on page 53
• “Encoder + Server stage” on page 68
• “Router Gateway stand-alone stage” on page 73
• “Router Gateway + Server stage” on page 76
• “Advanced encoder stand-alone stage” on page 79
• “Advanced encoder + Server stage” on page 87
• “EDL Export, Save, Conform stage” on page 93
• “Archive stage” on page 99
• “Deploy remaining machines for full system” on page 111
• “Add live monitor encoders” on page 111
• “Test system interactions with multiple machines” on page 112
• “Add NewsBrowse Clients” on page 113
• “Administering NewsBrowse user access” on page 116
• “Adding custom fields” on page 119
• “Testing NewsBrowse client operations” on page 121