Verify nas access – Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 User Manual
Page 45

December 16, 2004
NewsBrowse Installation and Configuration Guide
45
Prepare for core configuration stages
6. After the NAS reboots, access the NAS configuration software as described earlier
in step 2 and step 3, except this time, enter the following in the browser address bar:
https://
The Status page appears.
7. In the Status page tree view, click
Network | Names/IPs
. The Names and IPs page
opens.
8. Set the following:
• Domain name - Enter the Client network Domain name.
• Gateway - Enter the IP address for the Client network gateway. Consult the
network administrator.
• Node Name - For example: (root-nb-nas-n)
9. In the tree view click
System | System Administration | Date/Time
. The Date/Time
page opens.
10. Select the correct time zone, date, and time.
11. Click
Save
, then select the
Restart
option to restart.
Reboot takes 2-10 minutes. Do not power-down the enclosure during reboot.
12. After the NAS reboots, access the NAS configuration software again as described
in step 6. The Status page appears.
13. In the Status page tree view, click
Storage | Shares | Create
and then click the
Next
button. The CIFS Share page opens.
14. Specify CIFS options as follows:
a. Enter Media as the share name.
b. Set user privileges. Select all of the following options:
- Writeable
- Public
- Browseable
- Available
(Do not select Case Sensitive)
c. Click
Save
.
15. Close the NAS Administration Tool.
Verify NAS access
Verify NAS access from production network machines, which are machines of the
following types:
• NewsBrowse server
• Single-channel encoder
• Advanced encoder