Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 114)

114 NewsBrowse Installation and Configuration Guide December 16, 2004
Chapter 3 Configuring the NewsBrowse System
Set up client PCs
The requirements for a NewsBrowse client PC are as follows:
• Network access to the NewsBrowse server
• Network access to NewsBrowse NAS machines. Refer to “Prepare NAS -
Windows Fastora” on page 40 for test procedures.
• DirectX 9.0c or higher
• Flash Player
• Live Filter
• NetTime
To set up a PC to satisfy these requirements, do the following:
1. From a client PC, open Internet Explorer 6 and browse to the following URL to
open the NewsBrowse launch page:
http:// root-nb-srv/nbui .
2. From the NewsBrowse Launch page, click Client Setup . Follow the Client Setup
on-screen instruction for Flash Player, for Live Filter, and (if you have not already
done so) for NetTime. Also refer to
“Prepare NetTime” on page 38 .
After installation be sure to clear the browser cache on client machines to insure
updated components are downloaded. To clear the browser cache in Internet Explorer
go to
Tools | Internet Options , from the General tab select the Delete Files button, check
Delete all offline content , and click OK .
Continue with the next procedure “Configure NewsBrowse Licenses” .
Configure NewsBrowse Licenses
You must configure the NewsBrowse server as per your NewsBrowse license to allow
user access to NewsBrowse application features.
To configure for NewsBrowse licenses, do the following:
1. From the NewsBrowse Launch page, click License & User Management . This
requires that you log in as NewsBrowse administrator.
• Login: root-nb-srv\nbadmin
• Password: *****
The License Manager page opens.
***** Contact Grass Valley
Support for password.