Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 76)

76 NewsBrowse Installation and Configuration Guide December 16, 2004
Chapter 3 Configuring the NewsBrowse System
For this configuration stage you configure the Router Gateway component for control
of your router controller (if used in your system).
The portion of the NewsBrowse system configured and tested in this stage is
illustrated by the following diagram.
Refer to “Two tier system diagram” on page 10 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of the encoder plus server, do the following:
1. “Add Router Gateway to Ingest Scheduler” on page 77
2. “Test: Router Gateway + Server stage” on page 78
3. “Checklist: Router Gateway + Server stage” on page 78
Router Gateway + Server stage
mpg
Video
Server
NewsBrowse Server
1-Channel
Encoder POWERFAULT DATA ALARM
Router
Gateway
Production Network
MDI Server
mpg
AV TC
TC
Network Attached
Storage
clk
D to A
info info
info