Configuration overview, Chapter 3 configuring the newsbrowse system, As well as those documented as – Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 User Manual

Page 28

NewsBrowse Installation and Configuration Guide

December 16, 2004

Chapter 3 Configuring the NewsBrowse System

Configuration overview

This flowchart illustrates the major tasks required
for configuring a NewsBrowse system. Core
configuration tasks are broken down into stages.
You can work through the configuration stages in
different ways, as follows:

Refer to the topics in the remainder of this chapter
for detailed instructions on each task.

If you are new to the NewsBrowse
system, follow the

Basic

path. At

each configuration page, configure
only those settings documented in
this manual as

Basic

. This path

allows you to learn the system and
resolve configuration problems in
stages, with a minimal number of
configuration variables and
machines added to the system at
each stage. Then, after you have
gained the understanding to make
each stage of the system work
properly, configure the remainder of
the system and add all machines.

If you are experienced with the
NewsBrowse system and you want
the fastest possible configuration,
follow the

Advanced

path and

configure the entire system in one
pass, adding all machines at each
stage. At each configuration page,
you can configure settings
documented as

Advanced

as well

as those documented as

Basic

You can also choose a combination
of Basic and Advanced paths to suit
your level of understanding and the
design of the particular
NewsBrowse system you are
configuring.

Configure

Test

Encoder +
Server
Stage

Configure

Test

Rtr. Gateway
Stand-alone
Stage

Configure

Test

Configure

Test

Configure

Test