Configure ask location: newsbrowse server, Encoder + server stage – Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 User Manual
Page 69

December 16, 2004
NewsBrowse Installation and Configuration Guide
69
Encoder + Server stage
Configure ASK Location: NewsBrowse server
This page tells the NewsBrowse server where to look for the ASK service. Since the
ASK service runs on the NewsBrowse server, you enter localhost for the ASK host
location. On all other machines you must enter the name of the NewsBrowse server.
Configure Media Frame Core ASK: Single-channel encoder
Make sure the single-channel encoder’s Ingest Control service is registered with the
ASK software component as a “Ingest” device, as explained in
Frame Core ASK: Register components” on page 51
.
B
a
si
c
A
d
va
nc
ed
D
o
n
o
t
m
o
d
ify
http://localhost:280
ASK Location
Open this page locally on the NewsBrowse server machine.
!
Enter
localhost
, since you are configuring on the NewsBrowse server itself.
!
Port 9010 is required. See
“Ports and services convention” on page 31
.
!
Saves changes. Changes are lost if you leave the configuration page without
updating.
Always click
Update…
buttons after making changes
It is not necessary to restart a service to put these settings into effect.