Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 41)

December 16, 2004 NewsBrowse Installation and Configuration Guide 41
Prepare for core configuration stages
• Use the remote Windows desktop, as explained in step 4 of the following
procedure, and then use standard Windows procedures to make all settings. If you
do this, read the subsequent steps in the procedure to identify the required settings.
• Use the Fastora configuration pages (Web based), as documented in the
following procedure, and make settings as instructed.
NOTE: If you plan to change the name of the NAS unit and you intend to use the
underscore character, such as in root_nb_nas_n, you must do so using standard
Windows procedures via the remote desktop. The Fastora configuration page does
not allow the underscore character.
To configure the Windows Fastora NAS for the NewsBrowse networks, do the
following:
1. From any Production network machine, enable the network to recognize the NAS
by adding an IP address within the subnet range of 192.168.50.0.
2. For the first NAS machine (nb-nas-1), open the NAS configuration software in
Internet Explorer by entering the following in the browser address bar:
https://192.168.50.31:8098
NOTE: Notice the s in the https: address. Also, make sure your browser allows
cookies and JavaScript (or JIT).
Subsequent NAS machines (nb-nas-2, nb-nas-3) have IP addresses incremented
accordingly (192.168.50.32, 192.168.50.33).
t Fastora IP address is 192.168.1.11.
3. Log on as follows:
Username: administrator
Password: triton
The Fastora Welcome page opens.
4. Do one of the following: