Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 40)

40 NewsBrowse Installation and Configuration Guide December 16, 2004
Chapter 3 Configuring the NewsBrowse System
configure as service .
3. Set Net Time options as follows:
a. Enter the host name for the primary and secondary server according to the
following table:
b. Select the RFC868(TCP) protocol for both servers
c. For the NewsBrowse server, select Allow other computers to sync to this
computer .
d. Leave other fields at the defaults and click Okay .
4. The PC clock should automatically update to match the server. If not, check
network connectivity and review install steps. All machines must be set for the
same time zone to function properly.
Prepare Profile Media Servers
On each Profile Media Server that is to interact with the NewsBrowse system, check
the following configurations and modify settings as necessary.
1. Set up as a NetTime client. Refer to preceding procedures.
2. Click Start | Run , enter regedit and press Enter . The Registry Editor opens.
3. In the Registry Editor open the following key:
HKEY_LOCAL_MACHINE/SOFTWARE/Tektronix/Profile/ShuttleAtMode
Set the key to TRUE .
4. On the Profile XP, start PortServer .
5. Add a shortcut to PortServer to the startup folder. This ensures that PortServer
always runs on the Profile XP, as it is required for NewsBrowse operation.
6. Verify that the following account has been added to the Profile system:
• username: nbadmin
• password: *****
Prepare NAS - Windows Fastora
For the Linux version, refer to “Prepare NAS - Linux Fastora” on page 145 .
NOTE: Procure IP addresses from the local network administrator prior to
configuring the NAS unit.
When you configure the Windows Fastora NAS for the NewsBrowse networks, you
can make network settings in the following ways:
NetTime Client Primary Server Secondary Server
A Production Network Client First Encoder Second Encoder
NewsBrowse server First Encoder Second Encoder
External (Client Network) Client NewsBrowse server MDI Server (optional)
***** Contact Grass Valley
Support for password.