The view system status area, The view selection area, The connection information area – Grass Valley Jupiter v.1.1.0 User Manual
Page 64
56
JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 4 — VSD Introduction
The View System Status Area
The View System Status area contains the information for the different
fixed views. The information that is displayed will change depending on
what View is selected. The different views are listed below in the View
Selection Area section.
The View Selection Area
The View Selection area contains the different fixed views and will list the
Custom view that is being used. The number of custom views available is
also displayed. The fixed view’s definitions are provided below.
Destinations view: Displays the destination’s or “output” categories, the lock
and protected status and the Levels for each destination. For more informa-
tion, see the
section.
Sources view: Displays the input categories and level statuses that have
been configured for the selected router. The Lock and Protected status is
shown on the page by color. For more information, see the
sec-
tion.
Control Boards view: Displays the name, type, status, uptime, IP address and
the MAC address for all configured control boards.
Tie Line view: Displays the group number, the Tie line number, the source,
the status, the number of destinations, the source router, and the destina-
tion router.
Custom views: Displays the name of the custom view that is being used and
the number of custom views that are available.
The Connection Information Area
The Connection Information area contains the information about the router
to which the VSD is connected and the status of the VSD. The connection’s
definitions are provided below.
Connection Status: Displays the status of the connection between the VSD
and the router.
Connection Settings: Displays the Setting’s name, IP address and the Device
ID the VSD is using to connect to the router.
Destinations: Displays the number of destination between the VSD and the
router.
Sources: Displays the number of sources between the VSD and the router.
Levels: Displays the number of levels between the VSD and the router.