Grass Valley Jupiter v.1.1.0 - Manual (Page 33)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 25
Basic XY Soft Panel Operating Procedures
Basic XY Soft Panel Operating Procedures
Making a Destination Selection / Status Check
Follow these steps to select a destination prior to making a switch or to
check status:
1. Select a new destination category; VTR is used in the example below
(
Figure 23 ). This selection will populate the Destination Entries fields
with the available destinations in the selected category.
Figure 23. Destination Category Section
2. Choose a destination entry; VTR-1801 is used in the example below
(
Figure 24 ). The name of the destination will be shown in the
Destination window (shown above the “entry” button) and the name of
the source that is currently switched to this destination, will be shown
in the Status window. The Status window is located in the top half of
the interface, in between the Destination Categories and the Source
Categories sections. See
Figure 20 on page 21 .
Figure 24. Destination Entries Section