Grass Valley Jupiter v.1.1.0 - Manual (Page 20)

12 JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 1 — Introduction and Installation
Follow these steps to assign a function key:
1. Select the Assign Function Key.... option from the Settings menu
(Settings> Assign Function Key....). The Assign Function Key dialog will
then appear.
Figure 12. Assign Function Key Dialog
2. Select a Function key from the drop-down list. Any function key
between F1 and F12 can be assigned.
3. Click the OK button to save the selection.
Setting Password Protection
A password can be used to protect the settings file if that is your preference,
see
Figure 13 . This setting is optional.
Follow these steps to set password protection:
1. Select Change/Set Password from the Settings menu (Settings>
Change/Set Password...).
Figure 13. Password Dialog
2. Enter a password in the New Password field. Passwords are case-
sensitive and must be from 1 to 20 characters in length. Any character
can be used, including spaces.
3. Re-enter the password entered in the New Password field into the
Confirm New Password field.