Grass Valley Jupiter v.1.1.0 - Manual (Page 52)

44 JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 3 — Multi-Level XY Soft Panel
Figure 47. Source Selection Options - Cannot be Selected
7. Click the Save button to retain the selected information for future use.
8. Click the Execute Sequence button. An Execute Sequence dialog will then
appear notifying you that, “The sequence has been sent.” Click the OK
button.
9. Click the Close button, on the Sequence dialog, if you do not want to
execute any more sequences.
Selecting an Existing Sequence
Once a Sequence (or Salvo) has been created and saved, it can be used
again, as needed. The Existing Sequence drop-down list, in the Existing
Sequence section, will show all saved sequences.
Follow these steps to select an existing sequence (or Salvo):
1. Select the sequence from the Existing Sequences drop-down list. In the
example below, (
Figure 48 ) the “Beta” sequence has been selected.
Figure 48. Existing Sequences Drop-Down List
2. Click the View Sequence button. ( Figure 49 )
Figure 49. Existing Sequences Drop-Down List
The “Beta” sequence’s settings will then appear in the Sequence List.
Removing an Existing Sequence
If you feel that you no longer need to keep a sequence, it can be removed
from the Existing Sequence drop-down list.
Both Levels
cannot be
selected