Grass Valley Jupiter v.1.1.0 - Manual (Page 53)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 45
Sequence Operations
Follow these steps to remove an existing sequence:
1. Select the sequence from the Existing Sequences drop-down list, as
shown in
Figure 50 .
Figure 50. Existing Sequences Drop-Down List
2. Click the Remove Sequence button, as shown in Figure 51 .
Figure 51. Remove Sequences Button
The Remove Sequence dialog will then appear ( Figure 52 ). This dialog
will ask if you want to remove the selected sequence. For this example,
the selected sequence is “Beta”.
Figure 52. Remove Sequence Dialog
3. Click the Yes button.
The “Beta” sequence’s settings will then be removed from the Sequence
List and the Existing Sequencing drop-down list.
Exporting an Existing Sequence
Existing sequences can be exported to a different location, where they can
be used by other Soft Panels.
Follow these steps to export an existing sequence:
1. Select the sequence from the Existing Sequences drop-down list, as
shown in
Figure 53 .
Figure 53. Existing Sequences Drop-Down List