Grass Valley Jupiter v.1.1.0 - Manual (Page 42)

34 JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 3 — Multi-Level XY Soft Panel
Multi-Level XY Soft Panel Operating Procedures
Destination Selection / Status Check
Follow these steps to select a destination prior to making a switch or to
check status:
1. Select a new destination category; vtr is used in the example below
(
Figure 32 ).
Figure 32. Destination Category Section
This step will populate the Destination Entries fields with the available
destinations in the selected category.
To scroll to additional categories, use the Paging buttons in the Destina-
tion Category field. Clicking the Last button will scroll to the last avail-
able category. The Paging buttons will only be available if there are
options that are not shown.
2. Choose a destination entry; OUT-012 is used in the example below
(
Figure 33 ).
Figure 33. Destination Entry Section
To scroll to additional entries, use the Paging buttons in the Destination
Entries field.
The name of the selected destination will be shown in the Destination
window (at the bottom of the screen). The name of the source(s) cur-
rently switched to this destination will be shown in the Status row.