Grass Valley Jupiter v.1.1.0 - Manual (Page 18)

10 JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 1 — Introduction and Installation
Saving the Device Settings
Save the settings by selecting the Save Settings option from the File menu
(File> Save Settings). The Save Device Settings dialog will then appear.
Follow these steps to save the device settings:
1. Create a name for the settings file. For example, the Panel Name “ES-
LAN2” could be used.
2. Click the Save button ( Figure 10 ).
Figure 10. The Save Button
The current connection settings are then saved to the "NetworkSet-
tings.xml" file, which is located in the installation directory for the specific
control panel. For example, C:\Program Files\Thomson\Jupiter Basic XY
would be the location for the settings for the Basic XY panel.
Clicking the Close Button Without Saving the Settings
The Save Network Connection(s) dialog ( Figure 11 on page 11 ) will appear
if a new connection has been created or if changes have been made to an
existing connection and then the
Close button is clicked before first clicking
the Save button.
The Save Network Connection(s) dialog will prompt you to save the
changes.
The Save
button