Grass Valley Jupiter v.1.1.0 - Manual (Page 27)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 19
Jupiter File Server Settings
Out Panel - This column is not used for Soft Panels.
Level Set - Select the CP Level Set name.
Override - This column is not used for Soft Panels.
Sequence - A Sequence Set can be created and named, which, when assigned
to a panel, makes the sequences in that set available on that panel.
Note Sequences are not used in the VSD application.
Control Panel Sets
The router sources and destinations for the Soft Panels are specified by cre-
ating a CP Input/Output set of type of CPESXTND for device type
CPESXTND, or CP-3800 for the device type CP-ESLAN. Soft panels use
level and sequence sets of type CP-3800.
These sets are assigned to each panel using the MPK Devices table.
The CP Input and Output sets are also the source of the eight-character
mnemonics displayed on the panel.
VSD Control panel sets must contain all Sources, Destinations, and Levels
to display the status correctly. The VSD does not support duplicate Source,
Destination, and Level entries.
Compiling
Before the panel can be used, the edited Jupiter set must be compiled and
the appropriate configuration set made active using the Control Center. For
more information, please refer to the Configurator section in the Jupiter
CM-4000 Installation and Operating manual.
Ordering Information
Table 3. Soft Panel Series Ordering Information
JUP-Soft Panel Series Software Control Panels
JUP-SP-Basic XY Basic XY soft panels featuring source to destination routing
JUP-SP-ML-XY Multi-Level XY soft panels featuring complex breakaway routing functions, lock &
protect of all levels or individual levels, configuration save and recall.