Grass Valley Jupiter v.1.1.0 - Manual (Page 45)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 37
Multi-Level XY Soft Panel Operating Procedures
This option will avoid having the Source connected to two Destinations at
the same time.
Swap/Undo
After each switch, the previous source automatically returns to the Preset
row so that each “Take” causes the last two sources to flip-flop. (The Preset
row is cleared when a new destination is selected.)
Level Breakaways (Split Switching)
This function allows different sources to be selected for different levels. For
example, you have the ability to switch the video without having to switch
the audio as well.
Checking Status of Selected Level
Select the desired destination category and entry. The status of each router
level will then be shown in the Status row, which is located at teh bottom of
the application.
Performing a Breakaway Switch
Follow these steps to perform a breakaway switch:
1. Select the desired destination category and destination entry.
2. Toggle on/off the desired levels by clicking the level in the Status row.
This will outline the fields for the selected levels ( Figure 38 ).
Figure 38. Status Row Selected
3. Select the desired source category and source entry.
This will load the Preset fields for the selected levels.
4. Press the Take button to execute the breakaway switch.
When the switch is complete the panel will revert to all-level switching if
the
Sticky Levels button is selected. If the Sticky Levels button is selected, then
the selected levels remain selected; otherwise, all level will be deselected.