Grass Valley Jupiter v.1.1.0 - Manual (Page 51)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 43
Sequence Operations
2. Click the Yes button.
Note Entries to Local Sequences can also be made by selecting an entry in the
Sequence List and then right clicking. The options are “Insert Entry Above”
the selected item or to “Insert Entry Below” the selected item.
Figure 43. Save Changes Dialog
3. Enter a name to identify the sequence in the Sequence Name field.
4. Select the destination from the Destination drop-down list. In the
example below, (
Figure 44 ) the destination, ACR9-53 has been selected.
Figure 44. Destination Drop-Down List
5. Select the All Levels button if you would like all levels to use the same
source. In the example below, ( Figure 45 ) “All Levels” was turned off.
The second level can now be selected.
Note All Levels are selected by default. Selecting the All Levels button makes each
individual level accessible for a breakaway switch in the sequence.
Figure 45. The All Levels Button -Turned Off
6. Select a source for each level.
Note The “white arrow” on the source drop-down list, shows that a source can be
selected. If a source cannot be selected the “arrow” will be grayed out. See
Figure 46 and Figure 47 on page 44 .
Figure 46. Source Selection Options - Can be Selected
Both Levels
can be
selected