Grass Valley Jupiter v.1.1.0 - Manual (Page 102)

92 JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual
Section 6 — VSD Procedures
3. Select a new local source for each selected Tie line and then select a
different cell in the Clearing Source column to apply the change
(
Figure 104 ).
Note The Changes are NOT made to the modified cell until a new cell has been
selected.
Figure 104. The Tie Line Clearing Editor
4. Select the OK button. The Tie Line Clearing Editor’s data is stored by
connection.
The Tie line should still be selected if not select the preferred Tie line.
5. Click the Clear Selected Tie Lines button ( Figure 105 ).
Modified Tie
Line
Selected Tie
Line