Grass Valley Jupiter v.1.1.0 - Manual (Page 11)

JUPITER AccuSwitch Soft Panels and Visual Status Display Instruction Manual 3
Software Installation
Installing the Soft Panel Application
The following instructions show the steps that are needed to install both
soft Panel applications. The Basic XY Soft Panel screens are used as exam-
ples. However, the Multi-Level XY instructions steps are identical to the
Basic XY instructions.
Follow these steps to start the Soft Panel application installation process:
1. Insert the supplied software CDROM into the computer’s CD Drive
and follow the prompts.
Note The CD should automatically start the installation process. If not, browse to
the CD, using Window Explorer, and then click the setup.exe icon.
2. If this is an Initial installation, you may see a message asking if you
want to install Microsoft .NET Framework. If so, select the
Yes button.
(The 3.5 SP1 version of .NET is located on the Soft Panel Installation
CD.)
Depending on the version of the computer’s OS, the system may reboot
automatically during this process.
Note After an auto reboot, it may take several minutes for the system to display the
Soft Panel installation welcome screen.
The Soft Panel Welcome screen will then appear ( Figure 2 ).
Figure 2. Soft Panel Installer Welcome Screen
3. Click the Next> button to begin the installation process. The License
Agreement screen will then appear ( Figure 3 ).