H3C Technologies H3C SecPath F1000-E - Manual (Page 89)

81
Figure 52 Network diagram
Configuration procedure
# Enter system view.
system-view
# Create scheduled job pc1, and enter its view.
[SecPath] job pc1
# Configure the job to be executed in the view of GigabitEthernet 0/1.
[SecPath-job-pc1] view GigabitEthernet 0/1
# Configure the firewall to start GigabitEthernet 0/1 at 8:00 on working days every week.
[SecPath-job-pc1] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown
# Configure the firewall to shut down GigabitEthernet 0/1 at 18:00 on working days every week.
[SecPath-job-pc1] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown
[SecPath-job-pc1] quit
# Create scheduled job pc2, and enter its view.
[SecPath] job pc2
# Configure the job to be executed in the view of GigabitEthernet 0/2.
[SecPath-job-pc2] view GigabitEthernet 0/2
# Configure the firewall to start GigabitEthernet 0/2 at 8:00 on working days every week.
[SecPath-job-pc2] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown
# Configure the firewall to shut down GigabitEthernet 0/2 at 18:00 on working days every week.
[SecPath-job-pc2] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown
[SecPath-job-pc2] quit
# Create scheduled job pc3, and enter its view.
[SecPath] job pc3
# Configure the job to be executed in the view of GigabitEthernet 0/3.
[SecPath-job-pc3] view GigabitEthernet 0/3
# Configure the firewall to start GigabitEthernet 0/3 at 8:00 on working days every week.
[SecPath-job-pc3] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo
shutdown