Secpath f5000-a5 application – H3C Technologies H3C SecPath F1000-E User Manual
Page 16

8
Figure 11 Network diagram
SecPath F5000-A5 application
Large data centers are connected to the 10G core network usually through a 10G Ethernet. The
F5000-A5 firewall has a 10G processing capability and abundant port features. It can be deployed at
the egress of a network to protect security for the internal network. You can deploy two firewalls to
implement stateful failover.
•
Active-active stateful failover can balance user data.
•
Active-standby stateful failover improves availability of the firewalls. They back up each other to
avoid a single point failure.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS