Configuring scheme authentication for telnet login, Configuring password, Authentication for telnet login – H3C Technologies H3C SecPath F1000-E User Manual
Page 31: Configuring scheme, Authentication for telnet, Login

23
Step Command
Remarks
5.
Configure the command level
for login users on the current
user interfaces.
user privilege level level
By default, the default command
level is 0 for VTY user interfaces.
6.
Configure common settings
for VTY user interfaces.
Optional.
The next time you attempt to Telnet to the device, you do not need to provide any username or password.
If the maximum number of login users has been reached, your login attempt fails and the message "All
user interfaces are used, please try later!" appears.
Configuring password authentication for Telnet login
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable Telnet.
telnet server enable
By default, the Telnet service is
disabled.
3.
Enter one or multiple VTY
user interface views.
user-interface vty first-number
[ last-number ]
N/A
4.
Specify the password
authentication mode.
authentication-mode password
By default, authentication mode
for VTY user interfaces is
password.
5.
Set the local password.
set authentication password { cipher |
simple } password
By default, no local password is
set.
6.
Configure the user privilege
level for login users.
user privilege level level
0 by default.
7.
Configure common settings
for VTY user interfaces.
Optional.
The next time you attempt to Telnet to the device, you must provide the configured login password. If the
maximum number of login users has been reached, your login attempt fails and the message "All user
interfaces are used, please try later!" appears.
Configuring scheme authentication for Telnet login
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable Telnet.
telnet server enable
By default, the Telnet service is
disabled.
3.
Enter one or multiple VTY user
interface views.
user-interface vty first-number
[ last-number ]
N/A
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS