H3C Technologies H3C SecPath F1000-E - Manual (Page 111)

103
Step Command Remarks
3. Display hotkeys. display hotkey
Optional.
Available in any view. See
Table
20 for hotkeys reserved by the
system.
The hotkeys in Table 20 are defined by the device. If a hotkey is also defined by the terminal software that
you are using to interact with the device, the definition of the terminal software takes effect.
Table 20 Hotkeys reserved by the system
Hotkey Function
Ctrl+A Moves the cursor to the beginning of the line.
Ctrl+B Moves the cursor one character to the left.
Ctrl+C Stops the current command.
Ctrl+D Deletes the character at the cursor.
Ctrl+E Moves the cursor to the end of the line.
Ctrl+F Moves the cursor one character to the right.
Ctrl+H Deletes the character to the left of the cursor.
Ctrl+K Aborts the connection request.
Ctrl+N Displays the next command in the command history buffer.
Ctrl+P Displays the previous command in the command history buffer.
Ctrl+R Redisplays the current line.
Ctrl+V Pastes text from the clipboard.
Ctrl+W Deletes the word to the left of the cursor.
Ctrl+X Deletes all characters to the left of the cursor.
Ctrl+Y Deletes all characters to the right of the cursor.
Ctrl+Z Returns to user view.
Ctrl+] Terminates an incoming connection or a redirect connection.
Esc+B Moves the cursor back one word.
Esc+D Deletes all characters from the cursor to the end of the word.
Esc+F Moves the cursor forward one word.
Esc+N Moves the cursor down one line (available before you press Enter).
Esc+P Moves the cursor up one line (available before you press Enter).
Esc+< Moves the cursor to the beginning of the clipboard.
Esc+> Moves the cursor to the ending of the clipboard.
Enabling redisplaying entered-but-not-submitted commands
After you enable redisplaying entered-but-not-submitted commands: