Displaying online users – H3C Technologies H3C SecPath F1000-E User Manual
Page 104

96
[Sysname-acl-basic-2030] rule 1 permit source 10.110.100.52 0
# Associate the ACL with the HTTP service so that only Web users from Host B are allowed to access
SecPath.
[Sysname] ip http acl 2030
Displaying online users
The firewall supports configuring user login control only in the Web interface.
Online users here refer to the users getting online after passing AAA authentication.
To display online users, select User > Online User from the navigation tree.
Figure 60 Online users
Table 17 Field description
Field Description
User ID
Identity of the online user in the system.
User Name
User name used for authentication.
IP Address
IP address of the user’s host.
User Type
Access type of the online user, including PPP, 8021X, Portal, GCM, Admin (Telnet,
Web), L2TP, MAC-authentication, and VoIP.
The webpage does not display FTP users.
Login Time
User login time.
Online Duration
Elapsed time after user login.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS