H3C Technologies H3C SecPath F1000-E User Manual
Page 28

20
Step Command
Remarks
7.
Configure the data bits
databits { 5 | 6 | 7 | 8 }
Optional.
By default, the data bits of the
console port is 8.
Data bits is the number of bits
representing one character. The
setting depends on the contexts to
be transmitted. For example, you
can set it to 7 if standard ASCII
characters are to be sent, and set it
to 8 if extended ASCII characters
are to be sent.
8.
Define a shortcut key for
enabling a terminal session
activation-key character
Optional.
By default, you can press Enter to
enable a terminal session.
9.
Define a shortcut key for
terminating tasks
escape-key { default | character }
Optional.
By default, you can press Ctrl+C to
terminate a task.
10.
Configure the type of terminal
display
terminal type { ansi | vt100 }
Optional.
By default, the terminal display
type is ANSI.
The device supports two types of
terminal display: ANSI and
VT100. H3C recommends you to
set the display type of both the
device and the client to VT100. If
the device and the client use
different display types (for
example, HyperTerminal or Telnet
terminal) or both are set to ANSI,
when the total number of
characters of the currently edited
command line exceeds 80, an
anomaly such as cursor corruption
or abnormal display of the terminal
display may occur on the client.
11.
Configure the user privilege
level for login users
user privilege level level
Optional.
By default, the default command
level is 3 for the console user
interface.
12.
Set the maximum number of
lines on the next screen.
screen-length screen-length
Optional.
By default, the next screen displays
24 lines.
A value of 0 disables the function.
13.
Set the size of history command
buffer
history-command max-size value
Optional.
By default, the buffer saves 10
history commands at most.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS