H3C Technologies H3C SecPath F1000-E User Manual
Page 40

32
Task Command
Remarks
Release a specific user interface.
free user-interface { num1 |
{ console | vty } num2 }
Available in user view.
Multiple users can log in to the
system to simultaneously configure
the device. You can execute the
command to release the
connections established on the
specified user interfaces.
You cannot use this command to
release the connection that you are
using.
Lock the current user interface.
lock
Available in user view.
By default, the current user
interface is not locked.
Send messages to the specified
user interfaces.
send { all | num1 | { console | vty }
num2 }
Available in user view.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS