H3C Technologies H3C SecPath F1000-E - Manual (Page 22)

14
3. Select a serial port to be connected to the device, and set terminal parameters as follows: set Bits
per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None, as
shown in
Figure 15 through Figure 17 .
NOTE:
On Windows 2003 Server operating system, add the HyperTerminal program first, and then log in to and
manage the device as described in this document. On Windows 2008 Server, Windows 7, Windows
Vista, or some other operating system, obtain a third party terminal control program first, and follow the
user guide or online help of that program to log in to the device.
Figure 15 Connection description
Figure 16 Specifying the serial port used to establish the connection