Removing a file, Remove a file at the cli, Remove a file in the bootware menu – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 52
7-30
For more information about the boot-loader command, see Device Management in the Fundamentals
Command Reference in the H3C WA Series WLAN Access Points Command References.
Set the application file attribute in the BootWare menu
Select 2 from the file control submenu to set the application file type. For more information, see
Switching the Working Mode Through the BootWare Menu
.
Removing a File
Remove a file at the CLI
To remove a file, execute the delete [ /unreserved ] file-url in user view, where,
z
/unreserved: Permanently deletes the files.
z
file-url: Name of the file to be deleted.
# Remove file test.txt in the root directory.
Delete flash:/test.txt?[Y/N]:y
%Delete file flash:/test.txt...Done.
File test.txt is removed into the recycle bin. To remove the deleted file from the recycle bin, use the
undelete command.
# Restore the deleted file test.txt from the recycle bin.
Undelete flash:/test.txt? [Y/N]:y
% Undeleted file flash:/test.txt.
For more information about the delete and undelete commands, see File Management in the
Fundamentals Command Reference in the H3C WA Series WLAN Access Points Command
References.
Remove a file in the BootWare menu
Select 3 from the file control submenu to remove a file.
Deleting the file in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 7884208 Aug/08/2008 20:00:00 M wa2200_fat.bin |
|2 428 Apr/26/2000 12:00:34 N/A private-data.txt |
|3 3923104 Apr/26/2000 12:01:38 B wa2200_fit.bin |
|0 Exit |