Ment by referring to, Figure 7-9, Figure 7-10 – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 41
7-19
Figure 7-9 Set up an upgrade environment
Figure 7-10 Set up an upgrade environment
z
As shown in
, the AP serves as the FTP client, and the PC serves as the FTP server.
Connect the Ethernet interface on the AP to the PC by using a crossover Ethernet cable. Ensure
the connectivity between the AP and the PC. In the example, the IP address of VLAN-interface 1 is
192.168.0.2, and that of the PC is 192.168.0.1.
z
In the upgrade environment shown in
, AP serves as the FTP client, and the PC serves
as the FTP server. AP and the PC are connected through a PoE switch. Ensure the connectivity
between the AP and the PC. In the example, the IP address of VLAN-interface 1 is 192.168.0.2,
and that of the PC is 192.168.0.1.
The FTP server is not installed on the AP by default. You need to purchase and install it yourself.
Displaying the System Files and Available Space of the Storage Medium
Use the dir command on the console terminal to view the files contained in the current file system and
the available space. For more information about the output description of the dir command, see
.
Directory of flash:/
0 -rw- 7884208 Apr 26 2000 12:04:49 wa2200_fat.bin
1 -rw- 1093 Apr 26 2000 12:01:37 startup.cfg
2 -rw- 9126 Apr 26 2000 12:01:27 config.cwmp
3 -rw- 33 Apr 26 2000 12:01:27 system.xml
14986 KB total (7234 KB free)