Displaying all files, Display all files at the cli, Display all files in the bootware menu – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 51: Setting the application file type, Set the application file attribute at the cli
7-29
Displaying All Files
Display all files at the CLI
Directory of flash:/
0 -rw- 7884208 Apr 26 2000 12:04:49 wa2200_fat.bin
1 -rw- 1093 Apr 26 2000 12:01:37 startup.cfg
2 -rw- 9126 Apr 26 2000 12:01:27 config.cwmp
3 -rw- 33 Apr 26 2000 12:01:27 system.xml
14986 KB total (7234 KB free)
Table 7-8 dir command output description
Field
Description
Directory of flash:/
The current directory name
rw
r: The file or directory is readable.
w: The file or directory is writable.
14986 KB total (7234 KB free)
If the available space of the flash is not enough, the upgrade fails.
For more information about the dir command, see File Management in the Fundamentals Command
Reference in the H3C WA Series WLAN Access Points Command References.
Display all files in the BootWare menu
Select 1 from the file control submenu. The following information appears:
Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 7884208 Aug/08/2008 20:00:00 M wa2200_fat.bin |
|2 428 Apr/26/2000 12:00:34 N/A private-data.txt |
|3 3923104 Apr/26/2000 12:01:38 B wa2200_fit.bin |
==========================================================================
Setting the Application File Type
Set the application file attribute at the CLI
# Specify application file wa2200_fat.bin as the main boot file.
This command will set the boot file of the specified board. Continue? [Y/N]:
The specified file will be used as the main boot file at the next reboot on slot 5!