Removing a file – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 47
7-25
saved, and then select the file path and filename by clicking Browse. Click Apply to upload the file to
the specified storage device.
Uploading a file takes some time. You are recommended not to perform any operation on the web
interface during the upgrading procedure.
Removing a File
Select Device > File Manage from the navigation tree to enter the file management page, as shown in
. You can remove a file by using one of the following ways:
z
Click the
icon to remove a file.
z
Select one or multiple files from the file list, and then click Remove File.
Automatically Managing and Upgrading the Applications Through
an AC or a US
You cannot directly manage the AP working in the fit mode, but you can by associating it with an AC or
a US.
Figure 7-13 Fit AP and AC (or US) network diagram
PC
Console
DHCP Server
PoE
AC or US
Auto Update Server
TFTP Server
AP
You can use a DHCP server in the network to assign IP addresses for the PC and the fit AP.
Configure IP addresses in the same network segment for the TFTP server and the TFTP client. In this
example, configure the IP address of the TFTP server as 192.168.0.1 and 192.168.0.2 for the Ethernet
interface of AC or US connecting with the TFTP server. You can use the ping command to check
whether the AP and the AC are connected successfully.