H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 28)

7-6
| <5> Modify Ethernet Parameter |
| <0> Exit To Main Menu |
| < Ensure The Parameter Be Modified Before Downloading! > |
=============================================================
Enter your choice(0-5):
2) Ethernet interface submenu of the WA2200 series and WA2600 series enhanced APs
=====================================
|Note:the operating device is flash |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Modify Ethernet Parameter |
| <0> Exit To Main Menu |
| < Ensure The Parameter Be Modified Before Downloading! > |
=============================================================
Enter your choice(0-3):
File control submenu
You can view and set the application file types and delete the files through this submenu.
Select 4 from the BootWare main menu to enter the file control submenu.
===============================================
|Note:the operating device is Flash |
| <1> Display All File(s) |
| <2> Set Application File type |
| <3> Delete File |
| <0> Exit To Main Menu |
=============================================================
BootWare operation submenu
Select 7 from the BootWare main menu to enter the BootWare operation submenu.
=================================================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
The WA2200 series and WA2600 series do not support BootWare backup.
Storage device operation submenu
Select 9 from the BootWare main menu to enter the storage device control submenu:
=============================================
| <1> Display All Available Nonvolatile Storage Device(s) |
| <2> Set The Operating Device |