H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 30)

7-8
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Enter your choice(0-9):
Select 6 to disable the AP from booting with the default configuration. It boots with null configuration,
shown as follows:
Enter your choice(0-9):6
Flag Set Success.
Fit/Fat Working Mode Switching
The AP can work in the fat mode, or cooperate with an AC or a US to work in the fit mode, and it can
switch between the fit mode and the fat mode.
Before working mode switching, identify the current working mode of the AP to determine whether it
needs to perform a mode switching.
Switching the Working Mode Through the BootWare Menu
The working mode of the AP depends on the main application file in its Flash. If the main application file
in the Flash is XXXX_fit.bin, the AP works in the fit mode; if the main application file in the Flash is
XXXX_fat.bin, the AP works in the fat mode.
When setting the working mode through the BootWare menu, you need to judge whether the main
application file in the Flash is consistent with the working mode. During the upgrade process, do not
change the main application filename, thus to avoid inconsistency of the working mode that has been
configured and the current working mode.
Select 4 from the BootWare main menu to enter the file control submenu:
============================================================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-3):
The following example illustrates the switching from the fat mode to fit mode.
1) Display the application program type in the BootWare menu:
Select 2 to enter the application program type submenu:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |