H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 17
6-2
service-type telnet
#
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#
wlan service-template 1 clear
ssid H3C
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.0.50 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface WLAN-BSS32
port link-type hybrid
port hybrid vlan 1 untagged
#
interface WLAN-Radio1/0/1
service-template 1 interface wlan-bss 32
#
load xml-configuration
#
user-interface con 0
user-interface vty 0 4
authentication-mode scheme
#
return
Table 6-1 Description of the default configuration
Field
Description
version 5.20, Release 1104P01
The AP software version currently in use
sysname WA2612-AGN
The default sysname is the AP model.
domain default enable system
The default enabled domain is system.
telnet server enable
By default, telnet server is enabled.
port-security enable
By default, port security is enabled.
vlan 1
VLAN 1 is the default VLAN, and you cannot create and
delete a default VLAN.