Upgrading an application, Backing up an application – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 39
7-17
Upgrading an Application.
You can download an application from a TFTP server to your AP, and upgrade the original application
with the new one. The configuration takes effect at the next boot of the AP.
# Download application file wa2200_fat.bin from the PC to the AP.
The file wa2200_fat.bin exists. Overwrite it? [Y/N]:y
Verifying server file...
Deleting the old file, please wait...
...................................
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...................
..........................................
TFTP: 7884208 bytes received in 13 second(s)
File downloaded successfully.
z
If the file name already exists on the AP, the system prompts whether to overwrite the file on the AP.
You need to choose Y or N for confirmation.
z
For information about the tftp command, see FTP and TFTP in the Fundamentals Command
Reference in the H3C WA Series WLAN Access Points Command References.
z
You can update a configuration file in the way you update an application file. A configuration file
can be modified by a text editor. You can modify a configuration file and then download the
modified configuration file to the AP, and the modification takes effect after the AP reboots.
Backing Up an Application
To back up an application, you can upload the application from your AP to a TFTP server.
# Upload application file wa2200_fat.bin on the AP to the PC, and save it as wa2200_fat.bin.
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait...
TFTP: 7884208 bytes sent in 13 second(s).
File uploaded successfully.