H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 20
6-5
To do…
Use the command…
Remarks
Specifying the Country Code
Specify the country code
wlan country-code code
Required
By default, the country code is CN.
For more information about country code
and country, see WLAN Service in the
WLAN Command Reference in the H3C
WA Series WLAN Access Points
Command References.
Configuring a Service Template
Create a WLAN service template.
wlan service-template
service-template-number
{ clear | crypto }
Required
By default, a clear-type service-template
has been configured.
Disable the advertising of SSID in
beacon frames
beacon ssid-hide
Optional
By default, the SSID is advertised in the
beacon frames.
If the advertising of the SSID in beacon
frames is disabled, the SSID must be
configured for the clients to associate with
the AP.
Specify the maximum number of
associated clients in a BSS
client max-count
max-number
Optional
Enable the authentication method
authentication-method
{ open-system |
shared-key }
Required
By default, open system authentication is
enabled.
z
If the current service template is of
clear type, you can only enable open
system authentication.
z
If the current service template is of
crypto type, you can enable open
system or shared key authentication.
Enable the service template
service-template enable
Required
By default, the service-template is
disabled.
Configuring the Radio of an AP
Enter radio interface view
interface wlan-radio
interface-number
—
Specify a radio type for the radio
radio-type { dot11a |
dot11an | dot11b | dot11g
| dot11gn }
Required
Support for this command depends on
your device model.
Map a service template to the
current radio
service-template
service-template-number
interface wlan-bss
interface-number
Required
Specify a channel number for the
radio
channel { channel-number
| auto }
Optional
By default, auto mode is enabled.
The working channel of a radio varies with
country codes and radio types. The
channel list depends on your device
model.