H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 31)

7-9
|1 7884208 Aug/08/2008 20:00:00 M wa2200_fat.bin |
|2 3923104 Apr/26/2000 12:11:16 B wa2200_fit.bin |
|0 Exit |
==========================================================================
Enter file No:
Table 7-2 Application program types
Type Description
'M' = MAIN
Main (M) application program that the system loads when startup. The newly
downloaded program is the M program by default.
'B' = BACKUP
Backup (B) application program. If the system finds no M program at startup, it
loads the B application program automatically.
'S' = SECURE
Secure (S) application program. If all the application programs in the Flash are
“N/A”, the system automatically loads the S application program at startup.
'N/A' = NOT ASSIGNED Indicates the application program type is not specified.
2) Set the selected file as the main application program (loaded when the system starts).
Type application program number 2 to enter the file attribute modification submenu:
Enter file No:2
Modify the file attribute:
==========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
==========================================================================
Enter your choice(0-4):
Table 7-3 File attribute submenu
Menu item Description
<1> +Main Specify the current application program as the main application program
<2> -Main
Cancel the main application program type of the current application program and specify
the program type as N/A
<3> +Backup Specify the current application program as the backup application program
<4> -Backup
Cancel the backup application program type of the current application program and
specify the program type as N/A
<0> Exit Exit the current submenu
Select 1 to specify the current application program wa2200_fit.bin as the main application program. The
system then sets file wa2200_fit.bin with attribute B to a file with attribute M+B, and file wa2200_fat.bin
with attribute M automatically changes to a file with attribute N/A.
Enter your choice(0-4):1
Set the file attribute success!
The system displays a successful prompt and returns to the file control submenu. Select 1 to display all
files.
============================================================