Associating the fit ap with an ac or a us, Viewing the system information of the fit ap, Associating the fit ap with the ac or us – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 48: Upgrade the application of the ap
7-26
Associating the Fit AP with an AC or a US
Viewing the system information of the fit AP
Since a fit AP is uniquely associated with the AC or US by the serial-ID of the fit AP, you need to first
view the serial-ID of the fit AP. Each model of the WA2200 series has a model number. The serial-ID
and the model number of a fit AP are set before delivery and are printed on the barcode at the back of
the AP.
Associating the fit AP with the AC or US
Follow these steps to associate the fit AP with the AC or US:
1) Enter system view.
2) On the AC or US, create AP view for the fit AP, with the view type consistent with the model number
of the fit AP. For example, create AP view with the name aptest2 and the type WA2220X_AG.
[Sysname]wlan ap aptest2 model WA2220X-AG
3) Configure the corresponding serial-ID of the fit AP in AP view, for example,
210235A29G007C000020.
[Sysname-wlan-ap-aptest2]serial-id 210235A29G007C000020
4) Configure the first RF interface in AP view and enable and the RF interface. For example, set the
RF type of the first RF interface in AP view named aptest2 to 802.11a and the channel number to
149 (with country code CN), and enable the RF interface.
[Sysname-wlan-ap-aptest2]radio 1 type dot11a
[Sysname-wlan-ap-aptest2-radio-1]channel 149
[Sysname-wlan-ap-aptest2-radio-1]radio enable
After the above operations, AP view named aptest2 is associated with the fit AP whose serial-ID is
210235A29G007C000020 and you can associate the fit AP with the AC or US.
Automatically Upgrading the Application of the AP Through the AC or US
After the above configuration, you can automatically upgrade the application of the fit AP through
command lines on the AC or US.
z
Automatic upgrade of the AP is triggered only when the application version of the AC or US is
inconsistent with that of the AP.
z
Automatic upgrade is completed by the AC or US. Do not perform any configuration on the AP.
Download the application to the Flash of the AC or US
The AC or US serves as the TFTP client, and the file server serves as the TFTP server. You can access
the TFTP server from the client by typing corresponding commands, and download the application to
the AC or US.
Upgrade the application of the AP
After setting an upgrade environment, perform the following operations on the terminal: