beautypg.com

Upgrading an application – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual

Page 35

background image

7-13

Figure 7-3 Modify the baud rate

Step3 Select Call > Call to reestablish the connection.

Figure 7-4 Reconnect the call

Then, press Enter in the serial interface submenu.

After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps in

HyperTerminal to ensure the normal display on the console screen when the system boots or reboots.

Upgrading an Application

Upgrading an application through the serial port is implemented in the submenu of the serial port.

Enter the BootWare main menu, and select 2 to enter the serial port submenu. For more information

about this menu, see

Serial interface submenu

.

Upgrade main application wa2200_fat.bin:

This manual is related to the following products: