H3C Technologies H3C WA2600 Series WLAN Access Points User Manual

Page 36

7-14

Step1 Change the communication baud rate by referring to

Select 2 from the serial interface submenu. The following prompt appears:

Please Start To Transfer File, Press To Exit.

Waiting...CCCCCCCCCCCCCCCCCCCC

Step2 Select Transfer > Send file… in the HyperTerminal window. The following dialog box appears:

Figure 7-5 Send File dialog box

Step3 Click Browse… to select the application file to be downloaded, and select Xmodem from the Protocol

drop-down list. Then click Send. The following dialog box appears:

Figure 7-6 Download the file using XMODEM

Upon successful download, the system displays the following information:

Download successfully!

7546496 bytes downloaded!

The system prompts you to name the application downloaded to the current storage medium:

Input the File Name:

1) If the input file name is different from the existing one, the downloaded application is given this

name, for example:

This manual is related to the following products: